0,8 - 3 mm Aluminium Tafel Alublech AL99 AW 1050A H14/H24 0,8 mm 100 300
SKU: 103192-0003
Suitable for this
-
120mm center punch made of chrome vanadium steel in various designs
from 3,77 €*
-
Sandpaper on roll 115mm x 5m in various grit sizes
5,18 €*
1,04 € per 1 m -
Sanding sponge set 3-piece grit 46 / 80 / 120 | Flexible sanding pad
2,65 €*
-
Sanding sponge set K60 & K80 for wood, metal & lacquer | 2 pcs.
3,53 €*
-
Cut-resistant gloves with latex coating | S-XXL
from 5,01 €*
-
Non-woven flap disc for angle grinders in various designs
from 8,47 €*
-
Automatic center punch 130mm with HSS tip
7,93 €*
Description
Aluminium panel
Material: Aluminium single-sided laminated AL99 AW 1050A H14/H24
EN 573-3 / EN 485-1 in different lengths and widths, please select your desired size.
Material properties
Use in contact with food: Yes
Weldability: gas = good, WIG = good, MIG = satisfactory
Surface treatment: protective anodizing = very good, decorative anodizing = satisfactory, paint/coating = very good
Cold formability: bending, pressing, deep drawing, upsetting, impact extrusion = very good
Corrosion resistance: weathering good, sea water = satisfactory
Solderability: hard soldering, friction soldering, soft soldering = very good
Use:
Vehicle and shipbuilding
food industry
apparatus engineering
architecture
model building
This item is also available made to measure in our online shop. You can find it under the following link:
- Aluminium sheet made to measure with 0.8mm thickness:
https://www.schmiedekult.de/08-mm-Aluminium-sheet-made-to-measure
- Aluminium sheet made to measure with 1mm thickness:
https://www.schmiedekult.de/1-mm-Alublech-Alu-Blech-Aluminium-Blechzuschnitt-bis-1-m
- Aluminium sheet made to measure with 1.5mm thickness:
https://www.schmiedekult.de/15-mm-aluminium-sheet-made-to-measure-aluminium-sheet-aluminium-sheet-cut-to-size
- Aluminium sheet made to measure with 2mm thickness:
https://www.schmiedekult.de/2-mm-Alublech-nach-Mass-Alu-Blech-Aluminium-Blechzuschnitt
- Aluminium sheet made to measure with 3mm thickness:
https://www.schmiedekult.de/3-mm-Alublech-nach-Mass-Alu-Blech-Aluminium-Blechzuschnitt
Attention: the sheets are film coated on one side and may have scratches on the reverse side. The cut edges are not deburred!
The cutting tolerance for sheets is +- 2 mm.
Technical features
- Material
- Aluminum
- Product type
- Metal Sheet
- Material
- AW-1050 (Al99,5)
Reviews
There are no reviews yet.
Write the first review for this item and help others make a purchase decision!
Question about item
Product safety & manufacturer info
Manufacturer information:
rapa GmbH
Duisburger Str. 71
Emmerich am Rhein, 46446
Deutschland
gpsr@schmiedekult.de
https://www.schmiedekult.de/
Information on product safety:
Warning notices
- Caution! The sheet metal could have sharp cutting edges that could cut you. As we do not know for what purpose the sheets are used, we unfortunately cannot deburr them without interfering with any weld seam preparations. For this reason, we recommend wearing cut-resistant gloves!
- Keep away from other metals! Aluminum should never be brought into direct contact with other metals because contact corrosion can occur. Contact corrosion can weaken both the aluminum and the other metal. Only process with respiratory protection! Aluminum should only be processed with appropriate respiratory protection, as aluminum dust has health risks.
- Weld only with fume extraction! Aluminum may only be welded with an appropriate fume extraction system and using suitable respiratory protection. The gases produced during welding can cause severe health damage.
