2 mm Alublech nach Maß Alu Blech Aluminium Blechzuschnitt
SKU: 104106
Suitable for this
-
120mm center punch made of chrome vanadium steel in various designs
from 3,77 €*
-
Automatic center punch 130mm with HSS tip
7,93 €*
-
Deburrer with 360° rotating blade & 2-component handle
13,69 €*
-
Sandpaper on roll 115mm x 5m in various grit sizes
5,18 €*
1,04 € per 1 m -
Sanding sponge set 3-piece grit 46 / 80 / 120 | Flexible sanding pad
2,65 €*
-
Sanding sponge set K60 & K80 for wood, metal & lacquer | 2 pcs.
3,53 €*
-
Cut-resistant gloves with latex coating | S-XXL
from 5,01 €*
-
Non-woven flap disc for angle grinders in various designs
from 8,47 €*
Description
Aluminium panel
Material: Aluminium single-sided laminated AL99 AW 1050A H14/H24
EN 573-3 / EN 485-1 in different lengths and widths, please select your desired size.
Material properties
Use in contact with food: Yes
Weldability: gas = good, WIG = good, MIG = satisfactory
Surface treatment: protective anodizing = very good, decorative anodizing = satisfactory, paint/coating = very good
Cold formability: bending, pressing, deep drawing, upsetting, impact extrusion = very good
Corrosion resistance: weathering good, sea water = satisfactory
Solderability: hard soldering, friction soldering, soft soldering = very good
Use:
Vehicle and shipbuilding
food industry
apparatus engineering
architecture
model building
Attention: the sheets are film coated on one side and may have scratches on the reverse side. The cut edges are not deburred!
The following tolerances apply to blanks and fabrications:
Length and width tolerance:
from 0 - 200mm: +/- 2,0mm
from 200mm - 2000mm: +/- 2,5mm
from 2000mm: +/- 3mm
Technical features
- Production type
- Rolled
- Surface
- Strength
- 0mm - 2mm
- Material
- AW-1050 (Al99,5)
Reviews
based on 8 reviews
- 5 100%
-
0%
4
-
0%
3
-
0%
2
-
0%
1
Share your experiences with other customers!
Question about item
Product safety & manufacturer info
Manufacturer information:
rapa GmbH
Duisburger Str. 71
Emmerich am Rhein, 46446
Deutschland
gpsr@schmiedekult.de
https://www.schmiedekult.de/
Information on product safety:
Warning notices
- Caution! The sheet metal could have sharp cutting edges that could cut you. As we do not know for what purpose the sheets are used, we unfortunately cannot deburr them without interfering with any weld seam preparations. For this reason, we recommend wearing cut-resistant gloves!
- Keep away from other metals! Aluminum should never be brought into direct contact with other metals because contact corrosion can occur. Contact corrosion can weaken both the aluminum and the other metal. Only process with respiratory protection! Aluminum should only be processed with appropriate respiratory protection, as aluminum dust has health risks.
- Weld only with fume extraction! Aluminum may only be welded with an appropriate fume extraction system and using suitable respiratory protection. The gases produced during welding can cause severe health damage.
Others also bought:
-
Top rated
3 mm Alublech nach Maß Alu Blech Aluminium Blechzuschnitt
from 10,72 €*
-
Top rated
1 mm Alublech Alu Blech Aluminium Blechzuschnitt bis 1 m²
from 5,02 €*
-
Top rated
1.5 mm aluminium sheet made to measure aluminium sheet aluminium sheet cut to size
from 6,35 €*
-
Top rated
0.5 mm sheet steel Sheet iron Sheet metal Sheet metal DC01
from 2,97 €*
-
Best sellers
3mm Cortensteel sheet metal to measure
from 2,61 €*
-
Aluminum Z-profile Edge protection from 2mm aluminum sheet with top view bent to size
from 16,19 €*