+49 (0) 2822 53 755 75

2.5/4.0 mm aluminum tear plate Duett aluminum sheet checker plate Warp plate

Item review: 5,0/5,0 (1 Reviews)

SKU: 104111

Please note our general terms and conditions with regard to custom-made products.

9,47 € incl.  VAT , from 4,95 €

157,91 € per 1 m2

Available immediately

Estimated delivery between 22.10.2026 and 26.10.2026. (DE - int. shipments may differ)

piece
Detailed shipping and return information

The following shipping data refers to the standard configuration

  • Information for: DE

  • Standard shipping costs: 4,95 €

  • Detailed shipping time:

    Production time: up to 3 days

    Transit time: approx. 3 to 5 days

Custom-made items are excluded from the right of withdrawal (Section 312g (2) no. 1 of the German Civil Code, BGB). Your statutory warranty rights in the event of defects remain unaffected. Details in the Right of withdrawal

Category:
Sheets
Manufacturers:
GTIN:
4251393213942

Suitable for this

Description

Aluminum panel checker plate checker plate Duett

Material: Aluminum AW 5754 AIMg3
EN 1386 / EN 573-3

Features and typical areas of application:

  • Seawater-resistant (DIN 81249-1)
  • Offshore technology (DIN EN 13195-1)
  • Very easy to anodize
  • Good weldability
  • Shipbuilding
  • Food industry
  • Vehicle construction
  • Metal construction
  • Container construction
  • Thermostable with short exposure up to 160°C

Information:

  • Cutting tolerances for sheet metal: +/- 2 mm.
  • The products may have small scratches due to the manufacturing process.
  • Caution, aluminum is a sharp-edged material. Please use appropriate protective clothing, we accept no liability for damage or injury.
  • Aluminum has only a third of the specific weight of steel.
  • The low weight enables massive energy and cost savings in assembly, maintenance, transportation and production.
  • Good conductivity for electricity: 20-25 O x mm²
  • Good thermal conductivity: ~1.50 W/cm °C

Cut to size:

  • The sheets are laminated on one side and may have scratches on the back. The cut edges are not deburred!

The following tolerances apply to cuts and fabrications:

  • Length and width tolerance:
  • 0 - 200mm: +/- 2.0mm
  • 200mm - 2000mm: +/- 2.5mm
  • From 2000mm: +/- 3mm

Technical features
Material
AW-5754 (AlMg3)
Production type
Rolled
Surface
Strength
>2mm - 5mm

Reviews
Average item rating: 5/5

based on 1 reviews

  1. 5 100%

  2. 4

    0%

  3. 3

    0%

  4. 2

    0%

  5. 1

    0%

Share your experiences with other customers!

Reviews marked as "Verified purchase" were written by customers who verifiably purchased the item from this online shop.

Total entries: 1

  • Item review: 5/5

    Top Qualität - prompte Bedienung

    Artikel absolut wie gewünscht ...schnelle Lieferung ... jederzeit gerne wieder !!!!!!!!!!!!!!!!!!!!!!!!!!!
Contact data
Ask a question about this product

Product safety & manufacturer info

Manufacturer information:

rapa GmbH

Duisburger Str. 71

Emmerich am Rhein, 46446

Deutschland

gpsr@schmiedekult.de

https://www.schmiedekult.de/

Information on product safety:

Warning notices

  • Caution! The sheet metal could have sharp cutting edges that could cut you. As we do not know for what purpose the sheets are used, we unfortunately cannot deburr them without interfering with any weld seam preparations. For this reason, we recommend wearing cut-resistant gloves!
  • Keep away from other metals! Aluminum should never be brought into direct contact with other metals because contact corrosion can occur. Contact corrosion can weaken both the aluminum and the other metal.
    • Only process with respiratory protection! Aluminum should only be processed with appropriate respiratory protection, as aluminum dust has health risks.
  • Weld only with fume extraction! Aluminum may only be welded with an appropriate fume extraction system and using suitable respiratory protection. The gases produced during welding can cause severe health damage.

Others also bought: