4 mm Alublech nach Maß Alu Blech Aluminium Blechzuschnitt

Item number: 104108

166,60 €
166,60 € per 1 m2

including 19% VAT. , plus shipping

Available now!

Shipping time: 3 - 5 workdays

- + piece

Aluminium panel
Material: AIMg3 Aluminium one-sided foil AW 5754 H22
EN 573-3 / EN485-1


material characteristics
Use in contact with food: Yes
Weldability: gas = good, WIG = good, MIG = satisfactory
Surface treatment: protective anodizing = very good, decorative anodizing = satisfactory, paint/coating = very good
Cold formability: bending, pressing, deep drawing, upsetting, impact extrusion = very good
Corrosion resistance: weathering good, sea water = satisfactory
Solderability: hard soldering, friction soldering, soft soldering = very good


Use:

Vehicle and shipbuilding
food industry
apparatus engineering
architecture
model building


Attention: the sheets are film coated on one side and may have scratches on the reverse side. The cut edges are not deburred!

The following tolerances apply to blanks and fabrications:

Length and width tolerance:
from 0 - 200mm: +/- 2,0mm
from 200mm - 2000mm: +/- 2,5mm
from 2000mm: +/- 3mm


Herstellungsart: gewalzt
Surface: einseitig foliert untreated
Stärke: >2mm - 5mm
Material: AW-5754 (AlMg3) H22
Content, if no desired size is used.: 10.000,00 cm2

Average product review

Write your first review and help others with their purchase decision:

Contact
Question on item
max. 500 characters


Expert advice

Do you have any questions about our services?

Phone: +49 2851 96 77 255 | E-Mail: info@schmiedekult.de

Monday - Friday 09:00 - 16:00 o'clock

contact form