1mm bis 2,99mm Stahlblech Eisenblech Metall Feinblech Blech DC01 1,5 mm 200 700
SKU: 103195-0067
Suitable for this
-
Flap disc with 22.23 mm mount for angle grinders in various versions
from 2,96 €*
-
120mm center punch made of chrome vanadium steel in various designs
from 3,77 €*
-
Sandpaper on roll 115mm x 5m in various grit sizes
5,18 €*
1,04 € per 1 m -
Sanding sponge set 3-piece grit 46 / 80 / 120 | Flexible sanding pad
2,65 €*
-
Sanding sponge set K60 & K80 for wood, metal & lacquer | 2 pcs.
3,53 €*
-
Cut-resistant gloves with latex coating | S-XXL
from 5,01 €*
-
Steel wire disk brush knotted for angle grinders
from 6,83 €*
-
Cup brush with steel wire, knotted or coarsely crimped
from 3,53 €*
-
Non-woven flap disc for angle grinders in various designs
from 8,47 €*
-
Automatic center punch 130mm with HSS tip
7,93 €*
Description
Material: DC01 leicht gefettet
EN 1031/1030 in verschiedenen Größen.
Informationen:
- Schnitttoleranzen bei Blechen: +/- 2mm.
- Fertigungsbedingt können die Produkte kleine Kratzer aufweisen.
- Vorsicht, Stahl ist ein scharfkantiges Material. Bitte verwenden Sie entsprechende Schutzkleidung, wir übernehmen keine Haftung bei Beschädigungen oder Verletzungen.
- Schwarzer / Roher Stahl hat keinen Korrosionsschutz.
Zuschnitt:
- Auf Wunsch erhalten Sie einen Millimetergenauen* Zuschnitt, dafür wählen Sie die nächstgrößere Abmessung und teilen uns direkt nach Ihrer Bestellung das gewünschte Maß mit. Oder fügen die Abmessung direkt in der Kaufabwicklung unter Hinweis, Nachricht, Kontaktieren oder Anmerkung hinzu. ( *beachten Sie die Schnitttoleranzen )
Reviews
based on 14 reviews
- 5 100%
-
0%
4
-
0%
3
-
0%
2
-
0%
1
Share your experiences with other customers!
Product safety & manufacturer info
Manufacturer information:
rapa GmbH
Duisburger Str. 71
Emmerich am Rhein, 46446
Deutschland
gpsr@schmiedekult.de
https://www.schmiedekult.de/
Information on product safety:
Warning notices
- Caution! The sheet metal could have sharp cutting edges that could cut you. As we do not know for what purpose the sheets are used, we unfortunately cannot deburr them without interfering with any weld seam preparations. For this reason, we recommend wearing cut-resistant gloves!
- Rust hazard! The sheet metal can rust heavily in a short time. This rust can weaken the material and lead to complete failure. We always recommend applying a corrosion-resistant protective layer, e.g. by painting!
- Keep away from other metals! Steel should never be brought into direct contact with other metals, or in their immediate vicinity, because contact corrosion or cross-contamination can occur. Contact corrosion and cross-contamination can significantly weaken the affected metals. Stainless steel is particularly affected, as it loses its non-corrosive properties
- Only process with respiratory protection! Steel should only be processed with appropriate respiratory protection, as metal dust poses health risks.
- Weld only with fume extraction! Steel should only be welded with an appropriate fume extraction system and using suitable respiratory protection. The gases produced during welding can cause severe health damage.
Care instructions
Since steel has no corrosion protection of its own and therefore starts to rust quickly, a protective layer is recommended, which is maintained at regular intervals. A protective layer can be built up, for example, by painting, galvanizing, powder coating or by applying commercially available mineral oil.
