Freistehender Edelstahl Handlauf-Se -t starr 4001 mm - 4500 mm | 4 Pfosten Nein Bogen mit geraden Abschluss
SKU: 10994-079
- Category:
- Stainless steel
- Manufacturers:
- rapa GmbH
Suitable accessories
-
Bolt anchor for railing A4 M10.0x90
3,62 €*
-
Edelstahl Profi Pflege & Reinigung Stahligator 400 ml Aerosol Dose
15,40 €*
38,50 € per 1 l -
Threaded rod stainless steel A4 Anchor rod M10x130mm
3,55 €*
-
Roll tape measure with metric scale on both sides with 3m, 5m or 8m extension
from 7,78 €*
-
HSS-Cobalt 5% Metal Drill Bit – Short & Break-Resistant, Long Service Life | VA ECO
from 4,11 €*
-
Soft-face mallet with plastic handle in various sizes | Non-rebound
from 20,49 €*
-
SDS Plus hammer drill bit 5 - 25ø with groove and "V" four-cutter tip
from 2,59 €*
-
Sieve sleeve 16x130 for bolts, anchor rods ØM8 - M10 Composite mortar
0,55 €*
-
Injection Mortar Compound Mortar Assembly Mortar 145ml
from 12,49 €*
86,14 € per 1 l -
Steel wire brush 10mm for injection and composite mortar
4,02 €*
Description
"Where it's beautiful" - is the motto of our freestanding stainless steel handrail set.
With the Do it Yourself - freestanding stainless steel handrail set, you can install a custom-made handrail on your stairs, as a balustrade or as a guidance system indoors and outdoors without much difficulty.
Our free-standing stainless steel handrail set guarantees you a secure hold in wind and weather. Due to our high standards, you acquire a product of the finest quality and best workmanship for a lifetime.
Assembled in no time at all
To begin with, look at the distance between the posts. Have you found the right position? Then align the posts so that the handrail supports form a straight line.
Once you have aligned the posts to your liking, you can now mark them on the floor and drill the holes provided. You can then attach the posts to the ground.
Neither screws nor dowels are included in the scope of delivery for the floor fastening.
Now place the handrails (preferably in pairs) on the handrail supports and place the markings on the screw holes provided. Then use the stainless steel drill included in the delivery to make the holes and cut the threads.
When cutting the threads, please take care to pull the drill out again in an anti-clockwise direction so as not to damage the thread.
Once the holes are drilled, you can place the handrail on the handrail supports so that the drilled holes match the screw holes.
Finally, you can screw the handrail to the supports.
Included in delivery
- the handrail according to your measurements incl. the selected end caps
- the posts with welded-on handrail support which are rigid.
- the appropriate number of screws for fastening the handrail to the handrail bracket
- a 2 in 1 stainless steel drilling attachment ( tap )
Dimensions
The post height is measured as follows: From the top edge of the floor covering to the inner edge of the handrail support.
If you want to achieve a certain total height, you must add the handrail diameter (42.4 mm) to the length of the support.
Reviews
There are no reviews yet.
Hinweise zum 33,7mm Handlauf
Product safety & manufacturer info
Manufacturer information:
rapa GmbH
Duisburger Str. 71
Emmerich am Rhein, 46446
Deutschland
gpsr@schmiedekult.de
https://www.schmiedekult.de/
Information on product safety:
Warning notes:
- No fall protection! The free-standing handrail is not a substitute for professional fall protection and should not be used as a railing, as it offers insufficient protection due to the lack of infill between the posts. Only use the free-standing handrail as a handrail in places that do not require a railing. E.g. in the middle of a staircase to divide the direction of travel or at low heights.
- Use suitable fastening material! Only use fastening material suitable for your substrate. Screws, plugs and/or heavy-duty anchors must match your floor and be suitable for stainless steel. Observe building law! Please always observe applicable building law! The laws were created for a reason and are there to protect you.
- Note the care instructions! Please note that stainless steel must be cleaned regularly and generally cared for. Otherwise, the material may lose its rust-proof properties.
- Rust hazard! This stainless steel has only a low resistance to chemicals and acids in particular. For this reason, we must advise against using it in aggressive environments, as it damages the corrosion protection and could lead to material failure. For example, it is not recommended for use near pools, in cities with high levels of air pollution and in places in close proximity to the sea!
Installation instructions:
Please read the following instructions carefully before starting installation. Please also note that although it is generally possible to assemble alone, we recommend that at least two people do it, as it makes the work much easier.
Care instructions:
Please note that the free-standing handrail must be cleaned and maintained at regular intervals. If this maintenance is not carried out, or only insufficiently, the material may lose its rust-proof properties. You can use commercially available, non-acidic cleaning agents for cleaning. Please also note that the occurrence of occasional flash rust cannot be ruled out. Flash rust should be removed as quickly as possible to avoid any damage to the material.