French balcony made to measure as a kit
Our French balconies "Made in Germany" are made of stainless steel.
The qualitative workmanship ensures a simple, timeless design and completes the appearance of a façade.
There is a choice of two mounting methods for this model, the French balcony can be selected with wood or threaded screws. These are inserted through the handrail tube on both sides to secure them and fastened with a cap nut.
Data:
- The reveal dimension can be selected as desired from 500 to 2300mm (50 to 230cm).
- There are three options for the height of the French balcony 900mm / 1000mm / 1100mm (90cm / 100cm / 110cm).
- Both the upper and the lower tube have a diameter of 42,4mm and a wall thickness of 2mm.
- The connecting rods have a diameter of 12mm. Their number automatically adjusts to the selected length (width).
- M12 fixing screws. The distance mounting system ensures low heat loss in insulated and non-insulated facades.
- Cutting tolerances +/- 3mm
Important notes:
- A data sheet with all the important information for installation can be found under PDF.
- If the French balcony is attached to an insulated façade, make sure to fix it into the masonry during installation.
- Observe the currently valid building regulations of your country.
- Please make sure that the enclosed fixing material corresponds to your installation conditions.
Watch your step! Kit means that you receive all components in one delivery. This will be completely prepared in our own workshop and then shipped to you for assembly.
How do I measure correctly?
Measure the reveal width with a folding rule or tape measure. ( measure A )
The distance to the fixing should be chosen so that the holes on both sides are at least 100 mm away from the reveal edge. ( Talk to your planner or architect if necessary )
