+49 (0) 2822 53 755 75

Galvanized Z-profile Edge protection made of 3mm galvanized steel sheet bent to measure

Average item rating: 5,0/5,0 (2 Reviews)

SKU: 112564-006

Corrosion-resistant profiled strip made to measure in different sheet thicknesses from 0.5mm to 2.99mm and from galvanized sheet steel.

14,69 € incl.  VAT , from 8,49 €

Material thickness in mm

Available immediately

Estimated delivery between 21.10.2026 and 23.10.2026. (DE - int. shipments may differ)

piece
Detailed shipping and return information

The following shipping data refers to the standard configuration

  • Information for: DE

  • Standard shipping costs: 8,49 €

  • Detailed shipping time:

    Production time: up to 5 days

    Transit time: approx. 3 to 5 days

Custom-made items are excluded from the right of withdrawal (Section 312g (2) no. 1 of the German Civil Code, BGB). Your statutory warranty rights in the event of defects remain unaffected. Details in the Right of withdrawal

Category:
Sheets
Manufacturers:

Suitable for this

Description
Galvanized Z-profiles bent to size

Large variety through custom production
The comprehensive range of variations allows you to adapt your selected edge protection to your specific conditions. Simply select any material thickness and enter your desired dimensions in the corresponding fields.

Profiles up to 2m length possible
We can easily manufacture your galvanized profile rail between 50mm and 2000mm length and offer you the possibility to specify your desired length in millimeter accuracy.

Adjustable angle
You can also design the grades of the non-rusting edge profile in the range from 90° to 180°. In this way you can design a suitable decorative strip for almost any edge.

Individual side lengths
Whether it's a bit of a bit or a bit, adjust the profile pages to your application and achieve the perfect result.

Corrosion protection by galvanization
Due to their zinc coating, the edge protection profiles have strong resistance to grate and can thus also be installed in the outer region. Only at the cutting edges can corrosion occur in individual cases.

Notes
Despite careful processing, edge protection can have sharp cutting edges. Note that the material can have small scratches or oil traces due to production.We do not assume any liability for injury or damage.

From a length of 1000mm, slight bending can occur in length.

Please note our manufacturing tolerances of ± 2mm for profile length and ± 1° for angle.

Technical data

Technical features
Special features
Material
Galvanized steel
Material
DX51+Z
Surface
Galvanized
Profile shape
Z profile
Rust protection
Galvanizing
Strength
2,99mm

Reviews
Average item rating: 5/5

based on 2 reviews

  1. 5 100%

  2. 4

    0%

  3. 3

    0%

  4. 2

    0%

  5. 1

    0%

Share your experiences with other customers!

Reviews marked as "Verified purchase" were written by customers who verifiably purchased the item from this online shop.

Total entries: 2

  • Item review: 5/5

    Top Ware

    Mit der maßgerechten Herstellung des Z-Bleches war ich absolut zufrieden. Da stand ein Profi an der Abkantbank. Mit so einer guten und perfekten Ausführung habe ich nicht gerechnet. Ich war hellauf von diesem Blech begeistert. Alles passte auf den mm genau! Der Preis war völlig ok und auch die Lieferung erfolgte schneller als angekündigt. Diese Firma wandert in meinem Portfolio. R. *****
  • Item review: 5/5

    Z-Blech

    Gute Ware, schnelle Lieferung, gerne wieder.
Contact data
Ask a question about this product

Product safety & manufacturer info

Manufacturer information:

rapa GmbH

Duisburger Str. 71

Emmerich am Rhein, 46446

Deutschland

gpsr@schmiedekult.de

https://www.schmiedekult.de/

Information on product safety:

Warning notices

  • Caution, risk of cuts! The sheet metal profile could have sharp cutting edges that could cut you. Unfortunately, we cannot deburr the profile without damaging the protective zinc coating and thus the corrosion resistance. For this reason, we recommend wearing cut-resistant gloves!
  • Keep away from other metals! Galvanized steel should never be brought into direct contact with other metals, or in their immediate vicinity, because contact corrosion or cross-contamination can occur. Contact corrosion and cross-contamination can weaken the affected metals. Stainless steels are particularly badly affected, as they can lose their non-corrosive properties.
    • Only work with respiratory protection! Galvanized steel should only be worked on with appropriate respiratory protection, as zinc dust has health risks.
  • Weld only with fume extraction! Galvanized steel may only be welded with an appropriate fume extraction system and using suitable respiratory protection. The gases produced during welding can cause severe poisoning.

Care instructions

Galvanized sheet metal is generally protected against rust and weathering and does not require any special care. Only the cut edges should be sealed, depending on the application, as the corrosion protection is considerably limited at this point.

Others also bought: