Stainless steel handrail 1.4301 in grain 240 ground, with straight wall brackets, these are evenly divided, with cover rosettes.
End cap according to your choice.
The handrails are in tube diameter 42.4mm and have a tube thickness of 2mm.
Total height is about 113mm, the distance from the wall to the tube is about 70mm.
For subsequent increase of masonry parapets indoors and outdoors.
In the scope of supply are NO screws and dowels included (3 screws and dowels per holder), we recommend you in any case the use of so-called hexagonal screws made of stainless steel.
The screwing is best done with a wrench or socket wrench.
After screwing, the cover rosette can simply be slid on or secured with mounting adhesive or similar (not mandatory).
Please observe the building regulations of your respective federal state:
According to the building regulations of the federal states, the parapet must have a corresponding height, depending on the fall height and the regulation of the respective federal state. In many places this is not the case. If you do not want to completely install a parapet, you can use an elevated parapet.
You can also find this item made to measure in our online shop. You can find it under the following link:
https://www.schmiedekult.de/Handrails-for-parapets-stainless-steel-AISI304_3
