Stainless steel round steel V2A 12mm cross braces

Warning notices:

• Danger of cutting! Despite careful processing, it can happen that we overlook a sharp cut edge and do not deburr it. For this reason, we recommend wearing suitable, cut-resistant gloves.
• Keep away from other metals! Stainless steel should never be brought into direct contact with other metals, or in their immediate vicinity, because contact corrosion or cross-contamination can occur. Contact corrosion and cross-contamination can weaken the metals concerned and impair the stainless steel's non-corrosive properties. In the long term, complete material failure cannot be ruled out.
• Risk of rust! This stainless steel has only a low resistance to chemicals and acids in particular. For this reason, we advise against using it in aggressive environments, as this could damage the corrosion protection and lead to material failure. For example, use near pools, in cities with high levels of air pollution and in places in the immediate vicinity of the sea is not recommended!
• Follow the care instructions! Please follow the care instructions for the product. If not handled correctly, the stainless steel may lose its non-corroding properties.

Care instructions:

Stainless steel must be cleaned and cared for at regular intervals. If this care is not carried out, the material may lose its stainless properties. You can use commercially available, non-acidic cleaning agents for cleaning. Please also note that the occurrence of occasional flash rust cannot be ruled out. Flash rust should be removed as quickly as possible to avoid any damage to the material.