Cutting of angle iron:
-
Use the slider or type in the box to enter your desired dimension for a custom cut in the desired length.
-
For miter cuts, please note that the total length specified always refers to the longest part of the material, as shown in the sketch.
-
For many applications, the full length is not required, which is why we saw your angle steel to size with the highest precision using modern, high-quality sawing equipment.
We offer the following miter cuts:
- standard cut ( both sides are sawed at 90° to the angle )
- one-sided miter cut ( lying on long side )
- miter cut on both sides (lying on the long side)
- miter cut on both sides (lying on long side)
- miter cut on one side ( standing on short side )
- miter cut on both sides ( standing on short side )
- miter cut on both sides (standing on short side)
Material information:
Sawing service:
- Angle steel sawing to desired size.
Welding and processing:
Standard welding methods considered for this steel grade, the steels can be welded by hand and automatically in all thicknesses according to the above welding methods, observing the general rules of technology.
- TIG welding
- MAG welding
- Arc welding
- Submerged arc welding
Due to the high concentration of pollutants generated during welding, critical substances are to be expected in the air and at the workplace. The use of an extraction system for the direct local collection of the pollutants generated is an effective protective measure. If the extraction system is not sufficient, the welder must use personal respiratory protection.
Information:
- Cutting tolerances for angle steel: +/- 3 mm.
- Tolerance angle steel: +/- 3°.
- Due to manufacturing condition, the products may have small scratches. May not always show 90° due to manufacturing condition. There may be slight bends in the length. Surface impurities may occur. Radius can not be named due to manufacturing condition.
- Caution, steel is a sharp material, please use appropriate protective clothing, we assume no liability for damage or injury.
Sawing service - the advantages
-
Long goods sawn to size delivered within a few days.
-
You no longer need to hold stock.
-
Greatly reduced risk of damage due to automated goods handling and packaging. We saw materials with a diameter of up to 270mm. In addition to steel, stainless steel and aluminum, we can also supply non-ferrous metal sawn to size within a few days.
Special features and important information:
- Custom sawn angle steel falls under the term "custom made". Please note that we do not grant revocation for these items.
