Manufacturer information:
rapa GmbH
Duisburger Str.
71
Emmerich am Rhein,
46446
Deutschland
gpsr@schmiedekult.de
https://www.schmiedekult.de/
Safety instructions:
-
Caution! The anchor plate could have sharp edges that could cut you. For this reason, we recommend wearing cut-resistant gloves!
-
Risk of rust! The plate can rust badly in a short time. This rust can weaken the material and lead to complete failure. We always recommend applying a corrosion-resistant protective coating, e.g. by painting!
-
Keep away from other metals! Steel should never be brought into direct contact with other metals, or in their immediate vicinity, because contact corrosion or cross-contamination can occur. Contact corrosion and cross-contamination can considerably weaken the metals concerned. Stainless steel is particularly affected as it loses its non-rusting properties
-
Only work with respiratory protection! Steel should only be processed with appropriate respiratory protection, as metal dust poses health risks.
-
Only weld with a fume extractor! Steel should only be welded with an appropriate fume extraction system and using suitable respiratory protection. The gases produced during welding can cause serious damage to health.
Care instructions
As steel has no corrosion protection of its own and therefore starts to rust quickly, it is recommended that a protective coating is applied and maintained at regular intervals. A protective layer can be created, for example, by painting, galvanizing, powder coating or by applying commercially available mineral oil.
