Table kufe Anke - The table frame in A-shape
SKU: 114684
✅ About 200 kg Load capacity
✅ Paintable
✅ Industrial look
The table leg in A form is made of high quality Construction steel is available in many different versions.
You can't decide? Here to the best configuration.
Suitable accessories
-
5x16 Stainless Steel Lens Head Screw TX25
from 1,56 €*
-
5x25 stainless steel pan head wood screw
from 1,57 €*
-
5x35 stainless steel pan head wood screw
from 1,59 €*
-
galvanized steel stop angle in various designs
from 17,73 €*
-
Work gloves with latex coated in black/grey in size S-XL | Orgifox
from 0,78 €*
-
Automatic center punch 130mm with HSS tip
7,93 €*
-
Protective glides set of 80 pieces | gray-mottled
4,61 €*
-
120mm center punch made of chrome vanadium steel in various designs
from 3,77 €*
-
Aluminium water balance in different lengths
from 17,35 €*
Description
Customized table kufe Anke
Anke, the table frame to measure, is universal usable and always makes a good figure. No matter what Dining table, Desk or Washing tableIn any case, Anke offers a secure stand and convinces with its informal design.Thank you innovative shape, this table cube can also carry very narrow table tops to measure and thus allows the design of steadfast Tables. It is always made to your desired size, making sure that your personalized table runner fits perfectly under your table top. They simply determine an individual height from 300mm to 1200mm, any width from 600mm to 1000mm and we take care of the rest.
Easy to mount
Attaching the custom-made table runner to a table top is easy to play and can also be done by lay. The end plates from the table frame each have four holes through which they can be fixedly screwed to the table top. The Diameter the 8 holes 6mm and is therefore optimal for 5 screws suitable. As we build the table kufe according to its dimensions, avoid unpleasant surprises by false dimensions and make sure that their new table is no longer in the way.
A true eye-catcher
The table cube Anke-Series is an excellent choice for your DIYDo it yourself (make it yourself)- Project. The timeless design fits seamlessly into almost every room and presents itself as a special Eye-catchers.
Due to its simple elegance, this frame fits almost any table top. Whether wood or concrete optics, your imagination is not limited.
Please note that neither the table top nor the 2. Frame is included in the delivery.A Washful Power Protz
Made from high quality square tube, this table leg has also grown high loads. Anke does not yield so quickly and can with a carrying force of over 200 kg trump.
The table runner is fully welded and has HeadingsThe sheet with which the leg is screwed to the table top. with a thickness of 3mm.
The illustration serves for illustration and naturally deviates from the delivery.
A re-established unique
In loving Manual work we produce every table kufe on order and on your very individual size, giving them a specially built item.
Finest differences in surface quality, welds and the grinding pattern give each specimen a unique face.
In our family business, we place a lot of value on Quality and search our materials with a high degree Careful out. In this way we always try to deliver the best result.
The illustrated objects are of course not included in the delivery.Customize Anke here according to your wishes!
Scope
Scope of delivery is a single Table cube to measure (No pair) with Floor guards, which can be attached to the underside of the table kufe.
Notes
Please note our dimensional tolerances. Deviations of ±3mm and angles of ±3° may occur. Returns due to dimensional inaccuracy are excluded for table runners located within these tolerances.
Please wear suitable protective clothing when handling our table stoves. We do not assume liability for any damage to property or persons.
Technical data
Technical features
Reviews
There are no reviews yet.
Product safety & manufacturer info
Manufacturer information:
rapa GmbH
Duisburger Str. 71
Emmerich am Rhein, 46446
Deutschland
gpsr@schmiedekult.de
https://www.schmiedekult.de/
Information on product safety:
Warning notices:
- Max. 200kg! The maximum load capacity of a single table runner is 200 kg and must not be exceeded.
- Use suitable screws! Be sure to use suitable and sufficient screws to connect the table runner to the table top. If you are unsure which screws you need for your table top, please seek advice from a specialist dealer.
- Follow the care instructions! Please follow the care instructions to protect the table runner from rust.
Assembly instructions:
Attaching the table runner to a table top is usually child's play and can be done in no time at all. In the following, we describe the procedure for a commercially available laminated wood table top. Please note that the installation procedure may differ for other boards. In this case, ask the manufacturer of the table top for advice.
Please read the instructions carefully before starting assembly.
Material:
- Ruler (folding rule) or tape measure
- Pencil
- Screws
- Drill
- Twist drill (suitable for the screws)
- Screwdriver
Step by step instructions:
- Lay the tabletop on the floor and use a soft carpet pad (e.g. a carpet) to protect the wood from scratches. The underside of the tabletop, i.e. the side to which the table runner is attached, should now be facing upwards.
- Place the table runner upside down on the tabletop so that the fixing points of the runner are against the wood.
- Slide the table runner onto the place where you want to attach it. Measure the distances from the table runner to the outer edges of the table top to orientate yourself and create a symmetrical overall picture.
- Transfer the mounting holes of the table runner to your tabletop. To do this, simply run the pencil along the inside of all the holes and draw small circles on the tabletop. Depending on the pencil you choose, you may end up with individual dots in the middle of the holes instead of circles, which is also fine.
- Now carefully place the table runner to one side.
- Then drill small, vertical holes in the wood in the middle of the markings. These holes ensure that the wood does not split when the screws are screwed in and must have the correct diameter and be aligned at right angles to the surface. The diameter depends on the screws selected and can be obtained from a specialist retailer. It is also important to ensure that the holes are drilled sufficiently deep, but not completely through. This step requires special attention, as you could accidentally drill through the entire table top and thus damage the visible side of the table top.
- Place the table runner back on the tabletop and align the fixing holes in the runner with the corresponding holes in the tabletop.
- Now screw the screws through the fixing holes of the table runner into the wood of the table top and tighten them. Be careful not to use too much force, as the screws could turn and become unusable.
- If necessary, repeat the steps for additional table runners.
Care instructions:
Please read the following instructions carefully and follow them to keep your table runner in perfect condition.
For galvanized table runners:
Galvanized table runners do not require regular maintenance and can be cleaned with standard household cleaners. They also have excellent corrosion protection, which means they can be used in the garden without any problems.
For powder-coated table runners:
Powder-coated table runners without hot-dip galvanizing have a moderate level of corrosion protection that is sufficient for indoor use. They do not require regular maintenance and can be cleaned with standard household cleaners. However, ungalvanized table runners are not suitable for outdoor use as they rust quickly and can suffer from material failure over time.
For raw steel table runners:
Table runners without protective galvanizing or powder coating must be protected against corrosion as quickly as possible. This protection can be provided, for example, by painting or regular coating with mineral oil. Without corrosion protection, the table runners can rust and suffer from corresponding material failure.
