0,50mm DC01 Blech Stahlblech Eisenblech Metall Feinblech Blech in 800 x 1000mm
SKU: 103542-0080
Suitable for this
-
Scriber with pocket clip and carbide tip | 150mm
4,24 €*
-
Automatic center punch 130mm with HSS tip
7,93 €*
-
Ideal tin snips 260mm with 2-component soft grip | left/straight cutting
27,42 €*
-
Nibbling tin snips 240mm with ergonomic plastic handle
21,07 €*
-
Roll tape measure with metric scale on both sides with 3m, 5m or 8m extension
from 7,78 €*
-
Cut-resistant gloves with latex coating | S-XXL
from 5,01 €*
-
stainless steel ruler in different lengths
from 3,93 €*
Description
Thin sheet, sheet, cold-rolled thin sheet
Material: DC01 lightly greased
EN 1031/1030 in different sizes.
Information:
Cutting tolerances for sheet metal: +/- 2mm.
Due to production, the products may have small scratches.
Caution, steel is a sharp-edged material. Please use appropriate protective clothing, we assume no liability for damage or injury.
Black / raw steel has no corrosion protection.
This item is also available made to measure in our online shop. You can find it under the following link:
- DC01 sheet metal made to measure with 0.5mm thickness:
https://www.schmiedekult.de/05-mm-Stahlblech-Eisenblech-Metall-Feinblech-Blech-DC01
- DC01 sheet metal made to measure with 0.75mm thickness:
https://www.schmiedekult.de/Sheet-metal-made-to-measure-075-Sheet-steel-Iron-sheet-sheet-metal-cut-to-size
Reviews
based on 8 reviews
- 5 100%
-
0%
4
-
0%
3
-
0%
2
-
0%
1
Share your experiences with other customers!
Question about item
Product safety & manufacturer info
Manufacturer information:
rapa GmbH
Duisburger Str. 71
Emmerich am Rhein, 46446
Deutschland
gpsr@schmiedekult.de
https://www.schmiedekult.de/
Information on product safety:
Warning notices
- Caution! The sheet metal could have sharp cutting edges that could cut you. As we do not know for what purpose the sheets are used, we unfortunately cannot deburr them without interfering with any weld seam preparations. For this reason, we recommend wearing cut-resistant gloves!
- Rust hazard! The sheet metal can rust heavily in a short time. This rust can weaken the material and lead to complete failure. We always recommend applying a corrosion-resistant protective layer, e.g. by painting!
- Keep away from other metals! Steel should never be brought into direct contact with other metals, or in their immediate vicinity, because contact corrosion or cross-contamination can occur. Contact corrosion and cross-contamination can significantly weaken the affected metals. Stainless steel is particularly affected, as it loses its non-corrosive properties
- Only process with respiratory protection! Steel should only be processed with appropriate respiratory protection, as metal dust poses health risks.
- Weld only with fume extraction! Steel should only be welded with an appropriate fume extraction system and using suitable respiratory protection. The gases produced during welding can cause severe health damage.
Care instructions
Since steel has no corrosion protection of its own and therefore starts to rust quickly, a protective layer is recommended, which is maintained at regular intervals. A protective layer can be built up, for example, by painting, galvanizing, powder coating or by applying commercially available mineral oil.
Others also bought:
-
0,75mm DC01 Blech Stahlblech Eisenblech Metall Feinblech Blech in 800 x 1000mm
24,22 €*
30,27 € per 1 m2 -
1mm bis 2,99mm Stahlblech Eisenblech Metall Feinblech Blech DC01 1 mm 500 1000
18,15 €*
36,29 € per 1 m2 -
0,50mm DC01 Blech Stahlblech Eisenblech Metall Feinblech Blech in 100 x 100mm
2,81 €*
281,35 € per 1 m2 -
0.50mm to 0.75mm Sheet steel Sheet iron Sheet metal Sheet metal DC01 0.50 mm 200 400
4,07 €*
50,92 € per 1 m2 -
0,50mm DC01 Blech Stahlblech Eisenblech Metall Feinblech Blech in 200 x 500mm
4,43 €*
44,33 € per 1 m2 -
0,50mm DC01 Blech Stahlblech Eisenblech Metall Feinblech Blech in 300 x 400mm
4,79 €*
39,95 € per 1 m2