Aluminium panel
Material: Aluminium single-sided laminated AL99 AW 1050A H14/H24
EN 573-3 / EN 485-1 in different lengths and widths, please select your desired size.
Material properties
Use in contact with food: Yes
Weldability: gas = good, WIG = good, MIG = satisfactory
Surface treatment: protective anodizing = very good, decorative anodizing = satisfactory, paint/coating = very good
Cold formability: bending, pressing, deep drawing, upsetting, impact extrusion = very good
Corrosion resistance: weathering good, sea water = satisfactory
Solderability: hard soldering, friction soldering, soft soldering = very good
Use:
Vehicle and shipbuilding
food industry
apparatus engineering
architecture
model building
Attention: the sheets are film coated on one side and may have scratches on the reverse side. The cut edges are not deburred!
The following tolerances apply to blanks and fabrications:
Length and width tolerance:
from 0 - 200mm: +/- 2,0mm
from 200mm - 2000mm: +/- 2,5mm
from 2000mm: +/- 3mm
