+49 (0) 2822 53 755 75

Bolt anchor for railing A4 M10.0x90

Item review: 5,0/5,0 (1 Reviews)

SKU: 113985

3,62 € incl.  VAT , from 4,95 €

Available immediately

Estimated delivery between 11.09.2026 and 16.09.2026. (DE - int. shipments may differ)

piece
Detailed shipping and return information

The following shipping data refers to the standard configuration

  • Information for: DE

  • Standard shipping costs: 4,95 €

  • Detailed shipping time:

    Transit time: approx. 1 to 4 days

After receiving the goods, you have 30 days to withdraw from the contract if required

Returns are made by mail and the shipping costs are borne by the customer

Here you can submit your withdrawal if required: Withdrawal form

Manufacturers:

Suitable accessories

Description

To provide you with a secure hold for the railings, use our bolt anchors. The bolting is ideal for the exterior of brackets, railings, shelves, facades, cable trays, steel beams and window grilles. The bolt anchors are suitable in the application area of metal construction, mechanical engineering, timber construction, facade and solar.

The bolts are suitable for medium to heavy duty fastening for the cracked and non-cracked concrete. On the other hand, these are fire protection tested.

The bolts have a variable clamping range. This results in a high load-bearing capacity with extremely small axial and edge distances. Advantageously, the time-saving push-through assembly can create an immediate load-bearing capacity.

Instructions:

Step 1:
Mark drill hole and drill at least 80mm.

Step 2:
Clean drill hole with a steel brush

Step 3:
Insert anchor through the component to be connected into the drilled hole

Step 4:
Tighten nut or bolt with checked torque wrench.


Technical data:

AISI 316L
length: 90mm
Drive: SW 17
diameter: 10mm
Thread type: metric
Tensile strength: 700 N/mm²

Scope of delivery:
3x bolt anchor suitable for one post or one wall bracket.

Technical features
Einsatzbereich
Diameter
10 mm
Application area
Material

Reviews
Average item rating: 5/5

based on 1 reviews

  1. 5 100%

  2. 4

    0%

  3. 3

    0%

  4. 2

    0%

  5. 1

    0%

Share your experiences with other customers!

Reviews marked as "Verified purchase" were written by customers who verifiably purchased the item from this online shop.

Total entries: 1

  • Item review: 5/5

    Bolzenanker sind von hoher Qualität

    Einbau und Festigkeit sehr gut.

Question about item
Contact data
Question about item

Product safety & manufacturer info

Manufacturer information:

Schäfer + Peters GmbH

Zeilbaumweg 32

Öhringen, 74613

Deutschland

info@schaefer-peters.com

Information on product safety:

Manufacturer information:

In the technical data (10223spboz000 Rev04 - 2024), the manufacturer provides the following information on the article. This is not the actual wording, but rather a summary, as the manufacturer describes several articles in the same document. The manufacturer does not provide any further safety information on the product in the document, so that this summary can be regarded as complete.

SP-BOZ A4

Push-through anchor for cracked concrete

Technical data:

  • Screw diameter = M10
  • Drill hole diameter = 10mm
  • Through hole in the component to be connected = 12mm
  • Minimum drill hole depth = 80mm
  • Total length = 90mm
  • Minimum anchoring depth = 60mm
  • Minimum component thickness = 120mm
  • Setting depth = 67mm
  • Max. Effective length = 10mm
  • Torque = 40Nm

Assembly instructions:

  1. Drill according to the above instructions.
  2. Clean the drill hole.
  3. Insert the anchor through the component to be connected into the drill hole.
  4. Tighten the nut or screw with a checked torque wrench.

Others also bought: