The stainless steel (V2A) railing posts for bar railings are manufactured with our customary locksmith quality. With these posts, you can easily and quickly put together your very own and individual railing. The handrail support is firmly welded to the post, which ensures a high level of durability. In addition, the inclination of the handrail support plate can be adjusted, so that the handrail can be easily installed for ascents and descents. The handrail support for the corner posts is not adjustable.
Simple and quick assembly
You can choose from different assembly types, post types and post heights in the variations.
Note: With regard to the post height, please observe the respective state building regulations so that nothing stands in the way of a smooth building inspection.
The railing posts are completely assembled by us and are therefore sent to you ready for assembly. The brackets for the top and bottom rails are screwed to the post. The tubes can simply be plugged in and tightened with a grub screw.
The total railing height is measured with the handrail tube.
Example: Post height 900mm + handrail tube 42.4mm = Total railing height 942.4mm.
The post height is measured from the floor covering to the lower edge of the handrail tube.
As your safety is very important to us, we ask you to check all screw connections once again before assembly, as the connections may come loose during transport.
You would like to extend your railing around the corner? In our online shop you will find the matching connecting corner for the filler segments HERE.
The bracket on the post is suitable for the tube with the diameter 42,4x2mm. You can find the matching tube in our online shop HERE.
You can also purchase the railing directly as a set in our online shop HERE.
You will find the technical drawings, as well as detailed measurements for each post in the data sheets (PDF files).
Technical data:
- Compatible with type SG02
- Diameter of post tube 42,4x2mm
- Holder suitable for handrail tube 42,4x2mm
- Holder suitable for top and bottom rail 33,7x2mm
- Holder firmly welded
- Holders for upper and lower chord are connected to the posts with rivet nuts.
- Bracket plate (except for corner posts) adjustable in inclination
- Recommended mounting distance to edge: 150mm
- Manufacturing tolerances: +- 3mm
- Due to the manufacturing process, the products may show small scratches
- Caution, steel is a sharp-edged material. Please use appropriate protective clothing, we accept no liability for injuries or damage.
- We accept no liability for damage during assembly.
