The all-glass railing is a real eye-catcher thanks to its minimalist and elegant design. Nowadays, a glass railing is used in modern architecture.
The glass railing is attached without posts and takes up little space. With the clear glass, you get a clear view with maximum safety.
Mounting
You have chosen the Smart Y side mounting. The glass railing is attached to the side of your concrete slab with an aluminium rail. The aluminium rail is brushed and therefore also suitable for outdoor use. With an outer width of 66mm and an inner width of 34mm, the mounting is narrow and discreet, but still has enough space for mounting your glass pane. The glass stands at a height of approx. 95mm in the rail. The total height of the rail is 200mm. The holes are approx. 200mm apart and already present in the rail. The diameter of the holes is 14mm. The special thing about the Smart Y system is that you have a wedge-shaped aluminium rail. This allows you to position the rail and thus the glass railing higher. However, please note that the anchoring from the top edge of the concrete slab to the middle of the drill hole must be approx. 70 mm. The aluminium rail may be fixed max. 70mm above the concrete slab. The wedge-shaped fastening has a height of 108mm. The drill hole for fixing is 130mm from the top edge of the rail to the middle of the drill hole.
In the PDF file you can see all details illustrated again.
Technical data rail:
Material: brushed aluminium
Outer width: 60mm
Inner width: 34mm
Total height: 200mm
Diameter of drill holes: 14mm
Distance between drill holes: approx. 200mm
Height of wedge-shaped aluminium rail: 108mm
Position of drill hole for fixing: 130mm from top edge of rail to centre of drill hole
Anchorage must be at 70mm
Rail may be fixed max. 70mm above the concrete slab.
Handrail:
The handrail is made of brushed stainless steel V4A. It has a diameter of 42.4mm and a wall thickness of 1.5mm. The handrail is fitted and glued to the glass with a rubber insert. The inner diameter of the handrail is 24mm. The glazing bead tube has a total height of 37mm and a plug-in height of 24mm.
The all-glass railing can also be mounted without a handrail.
(Please note that the total height will change as a result).
Measuring:
To get the correct length of your glass railing, measure from outer edge to outer edge or corner to corner of your desired fixing location. You do not need to subtract any measurements or similar, this is taken care of by our production department.
Details of the safety glass:
The VSG glass has a thickness of 17.52 mm. Due to the clear view, you maintain the beautiful view from your balcony or staircase. When fixing the glass pane, please keep a minimum distance of 10mm to the next pane. Due to the expansion or contraction of the panes in different weather conditions, you do not risk any damage to the glass or the railing system itself by spacing them apart. A distance to the wall of 10mm is also recommended.
Fixing the glass pane with the Q-Disc system:
Step 1:
Insert the inlay into the floor profile.
Step 2:
Insert the glass pane
Step 3:
Insert the Q-disc between the glass and the inlay until it clicks into place.
Step 4:
Using the Q-tool, tighten the Q-disc in a clockwise direction to fix the glass in place
Step 5:
Check if any individual glass discs need to be aligned
Step 6:
To adjust a pane, loosen the Q-disc by turning it anticlockwise
Step 7:
To adjust the angle of the glass disc, move the inlay using the Q-tool
Step 8: Fix the glass pane by tightening the Q-disc clockwise using the Q-tool.
Included in delivery:
- Aluminium rail in your chosen dimension
- Glass panels matched to your chosen dimension
- Handrail tube in your chosen dimension
Not included in delivery:
- Cover caps for the aluminium rail
- Fixing material for mounting on the floor
Accessories:
- Cover cap
- Fixing material for floor mounting
- Spacer washer
- Drainage strip
- Fascia trim
- Fascia strip
Notice:
This is a custom-made product, these are excluded from revocation.
We accept no liability for damage or injury.
The product may show scratches or similar.
Country-specific building regulations must be taken into account
Only suitable for private use
Tolerances of +- 3mm for the rail and the glass