General Information:
Stainless steel handrail 1.4301 ground in grain 240.
The handrails have a tube diameter of 42.4mm and a tube thickness of 2mm.
The handrails have a total height of approx. 113mm.
For subsequent raising of masonry parapets in interior and exterior areas.
End cap of your choice.
Included in delivery are NO screws and dowels (3 screws and dowels per holder), we recommend in any case the use of so-called hexagon screws made of stainless steel.
It is best to use a wrench or socket wrench for screwing.
The cover rosette can be simply pushed on after screwing or secured with mounting adhesive or similar (no need).
Holder:
from 500 mm: 2 holders
from 2100 mm: 3 holders
from 3500 mm: 4 holders
from 4900 mm: 5 holders
The distance from the wall to the pipe is approx. 70 mm, the distance of the holders to the end of the pipe is 125 mm.
The flange plate including cover rosette has a diameter of approx. 70 mm and is equipped with 3 holes.
The drill hole size is 7 mm.
Please observe the building regulations of your respective federal state:
According to the building regulations of the federal states, the parapet must have an appropriate height depending on the fall height and the regulations of the respective federal state. In many places this is not the case. If you do not want to hinge the parapet completely, you can use a parapet heightening.
A brief insight into production and the manufacturing process
