Steel Galvanized U-profile Edge Protector Corner Protector Rail
SKU: 105558
Rail profile made to measure in different sheet thicknesses from 0.5mm to 3mm and from galvanized sheet steel.
- Category:
- Sheet metal
- Manufacturers:
- rapa GmbH
Suitable for this
Description
Large variety through custom production
With the wide range of variations, you can customize the galvanized U-profile with the material thickness you choose to suit your needs. Thanks to the freely selectable dimensions, you can design any desired profiles both as edge protection and as a running rail.
Profiles up to 2m length possible
We can easily manufacture your steel profiles between 50mm and 2000mm length and offer you the possibility to specify your desired length in millimeter accuracy.
Adjustable angles
You can also design the grades of the U-rails in the range from 90° to 180°. In this way you can design the perfect profile for almost any installation situation.
Individual side lengths
We also offer you the opportunity to design the dimensions of each profile page as desired. There are hardly any limits to you and if you should enter a measure that we cannot prepare, you will receive a corresponding message. So you can easily configure it and keep your creativity free.
Corrosion protection by galvanization
Due to their zinc coating, the cover profiles have a strong resistance to grate and can thus also be installed in the outer region. Only at the cutting edges can corrosion occur in individual cases.
Despite careful processing, the steel profile can have sharp cutting edges. Note that the material can have small scratches or oil traces due to production.We do not assume any liability for injury or damage.
From a length of 1000mm, slight bending can occur in length.
Please note our manufacturing tolerances of ± 2mm for profile length and ± 1° for angle.
Technical data
Technical features
- Special features
- Production according to customer size
- Material
- Galvanized steel
- Material
- DX51+Z
- Surface
- Galvanized
- Profile shape
- U-profile
- Rust protection
- Galvanizing
Reviews
based on 13 reviews
- 5 100%
-
0%
4
-
0%
3
-
0%
2
-
0%
1
Share your experiences with other customers!
Product safety & manufacturer info
Manufacturer information:
rapa GmbH
Duisburger Str. 71
Emmerich am Rhein, 46446
Deutschland
gpsr@schmiedekult.de
https://www.schmiedekult.de/
Information on product safety:
Warning notices
- Caution, risk of cuts! The sheet metal profile could have sharp cutting edges that could cut you. Unfortunately, we cannot deburr the profile without damaging the protective zinc coating and thus the corrosion resistance. For this reason, we recommend wearing cut-resistant gloves!
- Keep away from other metals! Galvanized steel should never be brought into direct contact with other metals, or in their immediate vicinity, because contact corrosion or cross-contamination can occur. Contact corrosion and cross-contamination can weaken the affected metals. Stainless steels are particularly badly affected, as they can lose their non-corrosive properties. Only work with respiratory protection! Galvanized steel should only be worked on with appropriate respiratory protection, as zinc dust has health risks.
- Weld only with fume extraction! Galvanized steel may only be welded with an appropriate fume extraction system and using suitable respiratory protection. The gases produced during welding can cause severe poisoning.
Care instructions
Galvanized sheet metal is generally protected against rust and weathering and does not require any special care. Only the cut edges should be sealed, depending on the application, as the corrosion protection is considerably limited at this point.