galvanized steel angle edged edge protection angle corner protector
SKU: 104827
Edge protection made to measure in different sheet thicknesses from 0.5mm to 3mm and from galvanized sheet steel.
Suitable for this
-
HSS-G Short Twist Drill, DIN 338 PROSTEP Type N with Stepped Tip | Ø 1–13 mm
from 2,59 €*
-
Deburrer with 360° rotating blade & 2-component handle
13,69 €*
-
Flap disc with 22.23 mm mount for angle grinders in various versions
from 2,96 €*
-
Ideal tin snips 260mm with 2-component soft grip | left/straight cutting
27,42 €*
-
Nibbling tin snips 240mm with ergonomic plastic handle
21,07 €*
-
120mm center punch made of chrome vanadium steel in various designs
from 3,77 €*
-
Sandpaper on roll 115mm x 5m in various grit sizes
5,18 €*
1,04 € per 1 m -
Sanding sponge set 3-piece grit 46 / 80 / 120 | Flexible sanding pad
2,65 €*
-
Sanding sponge set K60 & K80 for wood, metal & lacquer | 2 pcs.
3,53 €*
-
Cut-resistant gloves with latex coating | S-XXL
from 5,01 €*
-
Non-woven flap disc for angle grinders in various designs
from 8,47 €*
-
Automatic center punch 130mm with HSS tip
7,93 €*
Description
Large variety through custom production
The comprehensive range of variations allows you to adapt your selected edge protection to your specific conditions. Simply select any material thickness and enter your desired dimensions in the corresponding fields.
Profiles up to 2m length possible
We can easily manufacture angle profiles between 50mm and 2000mm length and offer you the possibility to specify your desired length in millimeter accuracy.
Adjustable angle
You can also design the degree of the edge profile yourself in the range from 90° to 180°. In this way you can design a suitable decorative strip for almost any edge.
Individual side lengths
Whether it's a bit of a bit or a bit, adjust the profile pages to your application and achieve the perfect result.
Corrosion protection by galvanization
Due to their zinc coating, the edge protection profiles have strong resistance to grate and can thus also be installed in the outer region. Only at the cutting edges can corrosion occur in individual cases.
Despite careful processing, edge protection can have sharp cutting edges. Note that the material can have small scratches or oil traces due to production.We do not assume any liability for injury or damage.
From a length of 1000mm, slight bending can occur in length.
Please note our manufacturing tolerances of ± 2mm for profile length and ± 1° for angle.
Technical data
Technical features
- Special features
- Production according to customer size
- Material
- Galvanized steel
- Material
- DX51+Z
- Surface
- Galvanized
- Profile shape
- L- profile
- Rust protection
- Galvanizing
Reviews
Product safety & manufacturer info
Manufacturer information:
rapa GmbH
Duisburger Str. 71
Emmerich am Rhein, 46446
Deutschland
gpsr@schmiedekult.de
https://www.schmiedekult.de/
Information on product safety:
Warning notices
- Caution, risk of cuts! The sheet metal profile could have sharp cutting edges that could cut you. Unfortunately, we cannot deburr the profile without damaging the protective zinc coating and thus the corrosion resistance. For this reason, we recommend wearing cut-resistant gloves!
- Keep away from other metals! Galvanized steel should never be brought into direct contact with other metals, or in their immediate vicinity, because contact corrosion or cross-contamination can occur. Contact corrosion and cross-contamination can weaken the affected metals. Stainless steels are particularly badly affected, as they can lose their non-corrosive properties. Only work with respiratory protection! Galvanized steel should only be worked on with appropriate respiratory protection, as zinc dust has health risks.
- Weld only with fume extraction! Galvanized steel may only be welded with an appropriate fume extraction system and using suitable respiratory protection. The gases produced during welding can cause severe poisoning.
Care instructions
Galvanized sheet metal is generally protected against rust and weathering and does not require any special care. Only the cut edges should be sealed, depending on the application, as the corrosion protection is considerably limited at this point.
-
Top rated
Steel C-profile made of sheet metal
from 16,96 €*
-
Top rated
Steel hat profile made of sheet metal
from 16,96 €*
-
Top rated
Steel Galvanized U-profile Edge Protector Corner Protector Rail
from 11,55 €*
-
Top rated
Steel U-profile Edge protection Corner protection rail Cover profile to measure
from 11,55 €*
-
Top rated
galvanized C-profile curved to measure from steel sheet
from 16,96 €*
-
Top rated
Galvanized hat profile to measure bent from steel sheet
from 16,96 €*
-
Top rated
Z Profile of galvanized steel bent to measure edge protection
from 11,58 €*
-
Z-profile made of steel bent to measure as edge protection
from 11,58 €*
Others also bought:
-
Top rated
2.99mm galvanized sheet steel DX51 made to measure
from 5,14 €*
-
Best sellers
Galvanized U-profile made of 3mm galvanized steel sheet edged to customer size
from 14,46 €*
-
Top rated
0.5mm galvanized sheet steel DX51 made to measure
from 2,97 €*
-
Galvanized U-profile made of 0.5mm galvanized steel sheet edged to customer size
from 12,27 €*
-
Top rated
2mm galvanized sheet steel DX51 made to measure
from 4,28 €*
-
Top rated
1mm galvanized sheet steel DX51 made to measure
from 3,38 €*