0,8 - 3 mm Aluminium Tafel Alublech AL99 AW 1050A H14/H24 0,8 mm 300 400
SKU: 103192-0024
Suitable for this
-
120mm center punch made of chrome vanadium steel in various designs
from 3,77 €*
-
Automatic center punch 130mm with HSS tip
7,93 €*
-
Sandpaper on roll 115mm x 5m in various grit sizes
5,18 €*
1,04 € per 1 m -
Sanding sponge set 3-piece grit 46 / 80 / 120 | Flexible sanding pad
2,65 €*
-
Sanding sponge set K60 & K80 for wood, metal & lacquer | 2 pcs.
3,53 €*
-
Cut-resistant gloves with latex coating | S-XXL
from 5,01 €*
-
Non-woven flap disc for angle grinders in various designs
from 8,47 €*
Description
Aluminium panel
Material: Aluminium single-sided laminated AL99 AW 1050A H14/H24
EN 573-3 / EN 485-1 in different lengths and widths, please select your desired size.
Material properties
Use in contact with food: Yes
Weldability: gas = good, WIG = good, MIG = satisfactory
Surface treatment: protective anodizing = very good, decorative anodizing = satisfactory, paint/coating = very good
Cold formability: bending, pressing, deep drawing, upsetting, impact extrusion = very good
Corrosion resistance: weathering good, sea water = satisfactory
Solderability: hard soldering, friction soldering, soft soldering = very good
Use:
Vehicle and shipbuilding
food industry
apparatus engineering
architecture
model building
This item is also available made to measure in our online shop. You can find it under the following link:
- Aluminium sheet made to measure with 0.8mm thickness:
https://www.schmiedekult.de/08-mm-Aluminium-sheet-made-to-measure
- Aluminium sheet made to measure with 1mm thickness:
https://www.schmiedekult.de/1-mm-Alublech-Alu-Blech-Aluminium-Blechzuschnitt-bis-1-m
- Aluminium sheet made to measure with 1.5mm thickness:
https://www.schmiedekult.de/15-mm-aluminium-sheet-made-to-measure-aluminium-sheet-aluminium-sheet-cut-to-size
- Aluminium sheet made to measure with 2mm thickness:
https://www.schmiedekult.de/2-mm-Alublech-nach-Mass-Alu-Blech-Aluminium-Blechzuschnitt
- Aluminium sheet made to measure with 3mm thickness:
https://www.schmiedekult.de/3-mm-Alublech-nach-Mass-Alu-Blech-Aluminium-Blechzuschnitt
Attention: the sheets are film coated on one side and may have scratches on the reverse side. The cut edges are not deburred!
The cutting tolerance for sheets is +- 2 mm.
Technical features
- Material
- Aluminum
- Product type
- Metal Sheet
- Material
- AW-1050 (Al99,5)
- Content, if no desired size is used.
- 0,12 m2
Reviews
There are no reviews yet.
Write the first review for this item and help others make a purchase decision!
