Stainless steel railing over two corners with optional powder coating
A high-quality railing made from stainless steel and to scale, with the possibility of mounting two corners, don't have to be expensive. That's exactly where we come from Schmiedekult. Our railings are made for you to measure, in our own castle factory, in the heart of the Lower Rhine and in loving handwork. With this stainless steel railing set you have a variety of choices that make life easier. So you can easily select in our configurator whether you prefer the posts in stainless steel or with powder coating in the colors black, anthracite or gray. You also have the option to choose between no fillers to 6 filling rodsmade of stainless steel solid material with a diameter of 12mm. In order to upgrade the optics, you will get split V4A stainless steel cover rosettes with the powder-coated posts. In the variant without powder coating, standard stainless steel cover rosettes are available without division.
With the self-construction set for stainless steel railings, you can easily and easily set a special accent. The railing is excl. approved for the private sector.
The posts are high from the upper edge floor covering to the lower edge of the handrail 900mm. This results in a solid overall height of 942,4mm due to the 42,4mm handrail. The handrail length of the corner variant is on request at least 0.5m to max. 15 m per page, millimeter-precisely selectable. For technical reasons, the handrail is delivered divided from a length of 6001mm (6.01m) and can then be brought together again with the aid of pipe connectors. A matching number of V2A pipe connectors is included in the package. The table below shows the number of posts according to the handrail length you choose.
| Handrail length |
Number of posts |
| 500mm - 1800mm |
2 posts |
| 1801mm - 3300mm |
3 posts |
| 3301mm - 4800mm |
4 posts |
| 4801mm - 6300mm |
5 posts |
| 6301mm - 7800mm |
6 posts |
| 7801mm - 9300mm |
7 posts |
| 9301mm - 10.800mm |
8 posts |
| 10.801mm - 12.300mm |
9 posts |
| 12.301mm - 13.800mm |
10 posts |
| 13.801mm - 15,000mm |
11 posts |
Small help position for length
The length indication for side A, side B and side C refer to the total length of the handrail as a so-called outer dimension. Please note that we do not make any deductions to your extent and make the railing as precise as possible according to your specifications. Any distances to the end of the bottom plate or to a wall must therefore be taken into account in your statement. Since the anchor plates of the posts approx. 31mm, we recommend an edge distance of at least 100mm.
Reling rails over 2 corners also known as U-shape
The stainless steel railing is also called a U-shape over 2 corners. It is a specific type of terrain that forms a U-shaped structure when viewed from above or from the sides.
These special railings are versatile and functional, which not only provide more safety, but also enhance the appearance in and at your home. They can be used in a variety of environments.
Production process of powder coating
In powder coating, the workpiece is first coated with an electrostatic powder. In this case, the powder is tightened by the material in a regular manner, so that a particularly uniform layer thickness extending into the corners is established. The workpiece is then heated in an oven, whereby the powder liquefies and melts to form a smooth coating.
In contrast to a conventional coating, the powder-coated paint is generally resistant to chemicals.
Our powder-coated stainless steel railing posts can be selected with or without filling rods. Of course, our products are manufactured by hand according to proven Schlosser standards in our own Schlosserei. In addition, the handrail carriers are firmly welded to the stainless steel posts, the advantage being that this ensures good stability.
What distinguishes the two-part cover rosette from the conventional variant?
The two-part cover rosette, made of ground V4A stainless steel, is provided exclusively for the powder-coated variant in order to avoid accidental scratching of the coating. These are joined effortlessly at the bottom of the post. In the stainless steel version (without powder coating), standard stainless steel cover rosettes are supplied, which are inserted from above into the posts. Both the two-piece and the standard cover rosettes offer an aesthetic cover of the fastening points.
Cross struts made of stainless steel
The high-quality filling rods, also known as cross struts, consist of solid stainless steel, have a diameter of 12mm and are characterized by the round design. They are not only aesthetically pleasing, but also offer outstanding stability and functionality. This avoids the penetration of water and dirt, which prevents deposits inside. The horizontal filling rods are simply attached to the posts by means of special holders, so they can be adjusted at any time. Eckige installation situations can be realized without problems with connecting corner joints.
For railings with a length of up to 6m, continuous transverse struts are provided. For longer railings from 6.01m, they are evenly divided and connected with special connecting pieces included in the delivery to ensure a uniform appearance.
Stainless steel handrail
The ground surface of the round stainless steel handrail offers not only a pleasant haptic, but also aesthetically pleasing and thus attracts all the views. High-quality stainless steel end caps are glued into the ends of the handrail pipe in order to prevent dirt deposits inside and at the same time to give the handrail a clean finish. When installing the handrail, the threaded bores must be made in the posts themselves in order to connect them to one another. A tap drill is included. In addition, you can download an assembly instructions at any time to make the installation of the handrail easy to play.
Areas of application of the railing
Our Relinggeländer Set offers a variety of applications. Thanks to the high-quality stainless steel, it is suitable not only for indoors but also for outdoors. The optics is noble and timeless and can be further enhanced by the optional powder coating of the posts. As a result, the Terrain Set fits perfectly into your property or garden and serves as a stylish design element. In addition, this railing is suitable for crash protection. A eye-catcher, regardless of its location, is guaranteed. Here are some of the applications:
-
Balcony railing: To safely surround balconies, even over two corners, while creating an aesthetic appearance
-
Garden railing: For terraces and garden areas that prefer a corner solution and serve as an elegant security and design element
-
porch railings: As a functional crash protection and decorative element for dams or roofs that do not get out without a corner solution
-
Zaungeländer: For the fence of your own property, making safety and design merge
-
Protection of terrace roofs and roofs: As a crash protection at elevated terrace or roof areas
-
Protection of terrace roofs and roofs: As a crash protection at elevated terrace or roof areas
-
Delimit different areas in the garden: For example around flower beds or garden beds
Thanks to our special design, our corner railing railings excl. for the Private use approved, due to the large distance and horizontal alignment of the filling struts.
Product details
-
Route: About two corners
-
Complete construction height of the railing: 94,4mm
-
Material post and bottom plate: stainless steel V2A optional powder coated, color according to the selection you have made
-
Material transverse struts/handrail: Stainless steel V2A
-
Material corner connector cross struts/handrail: Stainless steel V2A
-
Material covering rosettes: stainless steel V4A divided, bei der pulverbeschichteten Variante und Edelstahl ungeteilt, bei der Blanken Variante
-
Dimensions post: round Ø 42,4 x 2mm
-
Dimensions transverse struts: round Ø 12mm (full material), falls ausgewählt
-
Number of transverse struts: 0-6 Streben, according to the selection you have made
-
Dimensions handrail: round Ø 42,4 x 2mm
Scope
A railing set over two corners to measure with the following elements:
- Handrail tube incl. preassembled end cap slightly curved
- Screws for fastening the handrail tube to the post
- Corner connector for handrail
- Corner connectors for filling struts, Stückzahl entsprechend der ausgewählten Menge an Füllstreben
- Stainless steel drill with thread cutter for drilling and simultaneously cutting the thread into the hand barrel
- Number of stainless steel posts according to length (table), optional powder-coated posts according to your chosen desired color, with screwed filler stick holders, welded bottom plates and handrail carriers.
- Two-piece cover rosette made of ground V4A stainless steel bei der Pulverbeschichteten Variante, normale Abdeckrosette bei der Variante ohne Pulverbeschichtung
- Cross strut Ø 12.0 made of solid material, number depending on the selection you specified
Notes
Do you want additional posts or would you like to expand your railing? Then you will find the right railing posts for the railing railing in our online shop
Further features
