Free-standing stainless steel handrail set - rigid type FH02
Länge des Handlaufes
Abdeckrosette Pfosten
End cap
Genaue länge des Handlaufes in mm
Pfosten Höhe in mm angeben (max 1200 mm)
starting from 105,79 €

including 19% VAT. , plus shipping

Available now!

There are variations of this item. Please select the variation you wish.

"Where it's beautiful" - is the motto of our freestanding stainless steel handrail set.

With the Do it Yourself - freestanding stainless steel handrail set, you can install a custom-made handrail on your stairs, as a balustrade or as a guidance system indoors and outdoors without much difficulty.

Our free-standing stainless steel handrail set guarantees you a secure hold in wind and weather. Due to our high standards, you acquire a product of the finest quality and best workmanship for a lifetime.

Assembled in no time at all

To begin with, look at the distance between the posts. Have you found the right position? Then align the posts so that the handrail supports form a straight line.
Once you have aligned the posts to your liking, you can now mark them on the floor and drill the holes provided. You can then attach the posts to the ground.

Neither screws nor dowels are included in the scope of delivery for the floor fastening.

Now place the handrails (preferably in pairs) on the handrail supports and place the markings on the screw holes provided. Then use the stainless steel drill included in the delivery to make the holes and cut the threads.
When cutting the threads, please take care to pull the drill out again in an anti-clockwise direction so as not to damage the thread.
Once the holes are drilled, you can place the handrail on the handrail supports so that the drilled holes match the screw holes.
Finally, you can screw the handrail to the supports.

Included in delivery
- the handrail according to your measurements incl. the selected end caps
- the posts with welded-on handrail support which are rigid.
- the appropriate number of screws for fastening the handrail to the handrail bracket
- a 2 in 1 stainless steel drilling attachment ( tap )

Dimensions

The post height is measured as follows: From the top edge of the floor covering to the inner edge of the handrail support.
If you want to achieve a certain total height, you must add the handrail diameter (42.4 mm) to the length of the support.

Average product review

Write your first review and help others with their purchase decision:

Contact
Question on item
max. 500 characters


Hinweise zum 33,7mm Handlauf

Hinweise zum 42,4mm Handlauf

Expert advice

Do you have any questions about our services?

Phone: +49 2851 96 77 255 | E-Mail: info@schmiedekult.de

Monday - Friday 09:00 - 16:00 o'clock

contact form