Round handrail made of galvanized steel
We offer a fire-galvanized steel handrail to measure, it is made from a 42,4x2mm round tube with the designation S235JR. To ensure greater stability, the handrail carriers are firmly welded to the handrail. In addition, we offer a powder coating in the colors black, gray or anthracite, you can select the colors as usual in our configurator. Our experienced craftsmen manufacture your handrails with great care in our own workshop here in Germany and always use only read materials from well-known manufacturers.
Since the handrail is galvanized, we introduce so-called galvanizing holes on the handrails. These have a diameter of 8mm, are hidden on the underside and are necessary for technical reasons for the coating.
Individual adjustments easily implemented
With our configurator, ordering is done quickly and easily. You have the possibility to enter your desired length of 500-2500mm in adultchritten, as an additional highlight you can choose a colourful selection of powder coatings. For suitable protection at the ends of the handrail, you can opt for welded semi- hollow balls, welded slightly curved end caps or for laminated stoppers made of PE plastic in black or gray. This not only provides a suitable protection against injuries, but prevents the penetration of dirt or the like into the handrail. Simply select the desired variation and place it in the shopping cart. We value fairness and transparency, so you have the overview of prices at any time.
For handrails with a total length of up to 2000mm, two handrail carriers are used, each of which is placed 125mm offset by the handrails. For longer handrails from 2001mm to 2500mm, a third holder is additionally installed in the middle.
Advantages of fired handrail
-
Corrosion resistance: The fire galvanizing protects the handrail against corrosion, which increases durability and service life
-
Longevity: Fire galvanized steel is robust and durable and can therefore be used for many decades, without rust, outdoors
What is a powder coating?
The powder coating is a surface coating process in which a powdery lacquer is applied to a workpiece. After this step, it is heated in an oven, whereby the powder melts and forms a uniform coating. This coating offers a hard-wearing and resistant surface, even against chemicals and environmental influences.
Why a powder coating with galvanized handrails?
The powder coating serves as an additional corrosion protection of galvanized components and thus increases its service life. It makes the surface resistant to abrasion, scratches and chemicals. The electrostatic charging results in a uniform distribution and coverage, which leads to a high-quality surface. In addition, the powder coating offers a variety of colors, which ensures an appealing appearance.
Steel handrail with refractory zinc
Our handrail from a fire-galvanized round pipe construction steel, known as S235JR, is a eye-catcher in your indoor and outdoor areas. With a diameter of 42.4mm and a 2mm thickness, it is extremely stable. Each handle conveys the quality Made in Germany. The timelessly beautiful steel is easy to maintain and leaves a modern and well-maintained impression in your staircase, entrance or outdoor area.
Areas of application
In the following you will see a small information where an attachment would be possible:
- For indoor or outdoor stairs to provide additional support and security
- In the staircase
- At entrances and wheelchair ramps
- In the garden, for garden paths or terraces
- In entrance areas of your apartment or house
Of course, these are only a few examples of attachment and use. The possibilities are diverse, as the use of fire galvanizing makes it possible to use outdoors.
Fast and easy to mount
The assembly is very simple and simple in this metal handrail. The firmly welded carriers allow effortless installation to be twofold. Simply hold the handrail at a height of about 900 mm (measured from the front edge of the step) to the wall, make sure that the handrail follows the slope of the stairs, and transfer the holes of the welded holders to the wall. Finally, only drills that put dowels and screw the handrail. And you already have a suitable grip to support your home. Delivery is ready for installation with the desired end caps and holders.
A brief summary
Here a summary of the product property of the handrail
-
Length: 500mm to 2500mm
-
Round pipe steel: 42,4x2mm
-
Holder positions: 125mm from the ends
(Handrails from a length of 2001mm, get a third handrail in the middle)
-
light wall distance: approx. 54 mm
-
Holder height: 72mm
(perpendicular distance from lower edge of the handrail to the middle of the round)
-
Ronden diameter: 70mm
-
Round thickness: 6mm
-
Hole diameter 8mm
-
Hole distance: 50mm
-
Material: galvanized construction steel
-
Color: By choice
Scope
A round fire-galvanized steel handrail to measure, optionally with powder coating and optionally with welded hemispheres, welded slightly curved end caps or slat stoppers in gray or black.
Further features