+49 (0) 2822 53 755 75

Aluminium C-profile made of sheet metal

SKU: 114797

An aluminum sheet profile in C shape bent according to your dimensions. The profile consists of an aluminum sheet with an anpsque surface, is available in the wall thicknesses from 0.8mm to 5mm and is suitable for the outer area.

from 17,03 € incl.  VAT ,

Material thickness in mm
Page

Available immediately

This item has variations. Please select the requested variation.

Detailed shipping and return information

For the return conditions for custom-made products, please see our right of withdrawal

Category:
Sheets
Manufacturers:

Suitable for this

Description

C-profile made to measure

Our C-shaped sheet metal profile made of high quality aluminum will be for you edged as desired, is characterized by a variety of applications and is customizable by the online configurator. The profile is available with different wall thicknesses from 0.8mm to 5mm and offers a particularly high-quality look thanks to its beautiful surface. Due to the good corrosion-resistant properties of aluminium, the profile is also suitable for outdoor use.

Versatile possibilities

Thanks to the configurable dimensions and the low weight of the starting material, the aluminium profile for almost infinitely many applications is matched. Experience shows that the most common cases are the following:

  • A decorative strip in vehicle construction
  • Light rail for low loads
  • Cover for walls

Large variety through custom production

The to measure Curved and C-shaped aluminium sheets can be used by the comprehensive range of Variations adapt to your conditions. Select, for the profile, simply any material thickness, select the visible page and type Your requirementsin the corresponding fields. Since we edge our C-profiles with a modern die bending machine, you have hardly any limits. If the desired design is not technically feasible, our configurator will of course inform you.

Profiles up to 2m length possible

Our production allows the production of C profiles in a length of 50mm over 1000mm up to 2000mm. Of course, the length is also exactly configurable with millimieter.

Customizable angles and lateral lengths

Design the profile angles flexible and individual, in the range from 90° to 180°, according to your idea. The individual profile pages can also be individually adapted in the configurator. This allows you to create the perfect profile for your project.

Visibility page selectable

Simply determine the visible side of your profile and decide which profile sides are to be supplied with a protective film. The view page will be displayed in the preview in accordance with your selection and has a particularly noble appearance. The film protects the sensitive surfaces from damage to transport and can easily be removed from the profile.

Ideal for vehicle construction

The low weight of aluminum makes our sheet metal profiles particularly easy. This is ours Aluminium sheet C-profiles ideal for applications in places where every gram is important, such as when installing in campers, caravans and comparable vehicles.

Natural corrosion protection

The aluminum used has reliable corrosion protection, so that the profiles can easily be used in the outside area.

No mounting material yet?

Are you still looking for suitable material for assembly? Then how you want Assembly adhesive SMP 822 by Ego recommend. This high-performance adhesive is suitable for almost any substrate. It can be used indoors and outdoors, thanks to its permanent elastic properties it is also suitable for vehicle construction and has a very high initial adhesion. Find the right cartridge press here.

Scope

1x Alu C-profile according to your measurements

Notes

Despite careful processing, sharp cutting edges can occur, and the material can have smaller scratches or oil traces. We assume no liability for injury or damage. Light bending is possible for lengths from 1000mm. Please consider manufacturing tolerances of ± 2mm in profile length and ± 1° at angle.

Technical features
Special features
Material
Aluminum
Surface
Foiled on one side
Profile shape
C profile
Rust protection
Stainless material
Strength
Material

Reviews

There are no reviews yet.

Write the first review for this item and help others make a purchase decision!

Question about item
Contact data
Question about item

Product safety & manufacturer info

Manufacturer information:

rapa GmbH

Duisburger Str. 71

Emmerich am Rhein, 46446

Deutschland

gpsr@schmiedekult.de

https://www.schmiedekult.de/

Information on product safety:

Safety instructions:

  • Caution, risk of cutting! The sheet metal profile could have sharp edges that could cut you. As we do not know in what form the profiles will be used, we are unfortunately unable to deburr them without interfering with any welding seam preparations. For this reason, we recommend wearing cut-resistant gloves!
  • Not suitable for force absorption! For visual reasons, we bend the profile along the rolling direction. Unfortunately, this can have a negative effect on the stability of the material in the bends. For this reason, we advise against using it as a "load-bearing part". Please use the profile only as a passive component, e.g. as an edge protection profile.
  • Keep away from other metals! Aluminum should never be brought into direct contact with other metals because contact corrosion can occur. Contact corrosion can weaken both the aluminum and the other metal.
  • Only work with respiratory protection! Aluminum should only be processed with appropriate respiratory protection, as aluminum dust poses health risks.
  • Only weld with fume extraction! Aluminum may only be welded with an appropriate fume extraction system and using suitable respiratory protection. The gases produced during welding can cause serious damage to health.

Others also bought: