The composite mortar is perfect for fixing heavy loads. It can be used with many building materials, such as concrete, solid brick, perforated brick, calcareous sandstone, concrete block, aerated concrete, vertically perforated brick, etc. The advantage of the mortar is that it is styrene-free, low-odor and can therefore also be used indoors. The resin can also be used as a repair or filling compound. The composite mortar can be used in dry and wet concrete and water-filled boreholes.
Properties:
easy application
quick fixing
installation in dry, wet and water-filled boreholes
Waterproof connection
Expansion pressure-free fastening: no stresses in the base material
Small edge and axial distances
Does not change the appearance of the wall
Styrene-free: low odor, suitable for indoor use
Overhead installation allowed
no expansion effect, near-edge fixing possible
short application and curing time
very suitable for anchoring wood and steel structures
processing:
fits into a standard squeeze gun
by squeezing, the two components (hardener and resin) mix in the mixer
Cartridge can be reused by replacing the mixer
Application:
Fixing in plumbing, heating, air conditioning, carpentry, electrical, window elements, railings, handrails, gate systems.
Technical details:
Designation: UPM 33 - 300
Number of static mixers per cartridge: 2
Cartridge capacity: 300ml
Approval: concrete C20/25 to C50/60, cracked and non-cracked
Dry storage: +5°C to +25°C
Instructions:
1.Mark the drill hole at the desired location and drill the hole. Ensure a minimum edge distance of 50mm to avoid chipping of the concrete edge when tightening the bolt / anchor rod.
Remove the borehole dust from the borehole and clean it with the help of a blow-out pump and a suitable wire brush. 3.
Use a suitable sieve sleeve to reduce the consumption of the injection mortar. Insert the sleeve into the hole. Now fill the sieve sleeve with the composite mortar. Then close the sleeve with the cap with the centering wings. 4.
Now screw the bolt or the threaded rod/anchor rod into the sleeve. By turning it in, the injection mortar is forced out of the side of the sieve sleeve and bonds with the surrounding building material.
(Step 3 and 4 can also be carried out without the sieve sleeve. Here the consumption of the compound mortar will be higher).
Scope of delivery:
1x cartridge 300ml
2x static mixer
1x instruction
Danger:
Hazard statements (H-phrases)
H226 Flammable liquid and vapor
H315 Causes skin irritation
H319 Causes severe eye irritation
H412 Harmful to aquatic life with long lasting effects
